CERAMICSPEED Chain Lubricant UFO Drip Wet Conditions | 100ml
The engineers at Ceramicspeed have been working hard for years to develop the best chain lubricant in the world. After countless laboratory and field tests, the result is the UFO Drip Wet chain lube, a mixture of wax, trace oils and friction modifiers. It is suitable for bad and wet conditions and reliably sticks to the chain. The main goal was to significantly reduce friction in the drive train, which can make all the difference for racers.
Strictly speaking, the UFO Drip is not a lubricant, but a coating. While still a liquid when applied, it cures to a completely dry layer and repels foreign particles, which lead to increased friction and wear. According to Ceramicspeed, the driver saves between 2 and 5 watts of power when using it. In addition, the service life of the drive train is demonstrably extended by up to 40%. And should something drip onto the meadow when you apply it, there will be no negative consequences because the ingredients are biodegradable.
Application
Using it requires some patience. The chain should first be thoroughly cleaned and dried. Then, as shown in the video below, drip UFO Drip 2x each on the top and bottom of the chain and turn the cranks for 30 - 60 seconds to distribute it evenly. Approx. 8 ml is enough for a complete coating. The lubricant has to harden for about 8 hours between use and the next journey so that it can fully develop its effect. If the coating has been washed off the chain after driving in the rain, it should be applied again, otherwise after 200 km at the latest.
Technical specifications:
intended use : for maximum performance in cycling races
Weather conditions: recommended for wet weather conditions
Oil Type: Blend of wax, trace oils and friction modifiers (non-toxic and biodegradable)
Container: dropper bottle
Capacity: 100 ml
Weight according to the manufacturer: kA
Weight weighed: 117g